Perle Systems SCS, STS manual 247

Channels

Auto Clear Mode	When enabled, automatically clears the alarm when the trigger condition
	changes; for example, if the Trigger is Inactive and the alarm is triggered, once
	the input becomes active again, the alarm will automatically be cleared
	Default: Enabled
Manual Clear	When enabled, a triggered alarm must be manually cleared.
Mode	Default: Disabled
Email	When enabled, sends an email alert to an email account(s) set up in the System
	settings when an alarm is triggered or cleared. The email alert data includes the
	severity level and the value that caused the alarm to trigger or clear. The Email
	Alert is associated with Level Critical.
	Default: Disabled
Syslog	When enabled, sends a message to syslog when an alarm is triggered or
	cleared. The syslog entry includes the severity level and the value that caused
	the alarm to trigger or clear. The syslog message is associated with Level
	Critical.
	Default: Disabled
SNMP	When enabled, sends an SNMP trap when an alarm is triggered or cleared. The
	trap consists of the severity level and whether the alarm was triggered or
	cleared.
	Default: Disabled

247