Installing a Perle PCI Card

7.The black bracket should then fit on the inside of the PCI adapter card bracket. Align the adapter card bracket and then insert the screw and tighten it to keep it firmly in place.

32-port model

48-port model

Note: You must attach the bracket to the PCI adapter card before you slide it into the PCI slot.

8.If you are installing the PCI Adapter card, slide the wireless WAN card into the adapter card.

9.Slide the PCI adapter card into the PCI slot.

10.You can now replace the top of the IOLAN chassis by aligning it and sliding it into the base. You can throw away the face plate, as you will not be needing it.

32-port model

48-port model

11.Replace all the screws on the top and the serial side of the IOLAN. If you installed a wireless WAN card, you can now attach the external antenna to the card.

Accessories 381

Page 381
Image 381
Perle Systems SCS, STS manual Accessories