Perle Systems SCS, STS manual UDP port Direction, Start IP Address, End IP Address

Serial Port Profiles

zUDP Entry 3

All hosts that have an IP Address that falls within the range of 172.16.1.75 to 172.16.1.80 and who listen to Port 33009 will receive UDP data from the serial device. The IOLAN will listen for messages on the port value configured in the Listen for connections on UDP port parameter. No UDP data will be sent to the serial device.

zUDP Entry 4

This entry is disabled since Direction is set to Disabled.

General Tab Field Descriptions

Configure the following parameters:

Listen for	The IOLAN will listen for UDP packets on the specified port.
connections on	Default: 1000+<port-number> (for example, 10001 for serial port 1)
UDP port
Direction	The direction in which information is received or relayed:
	z Disabled—UDP service not enabled.
	z LAN to Serial—UDP Port can be set to Auto Learn or Port. The IOLAN
	will listen on port value configured in the Listen for connections on UDP
	port parameter for messages coming from the learned or configured port.
	z Serial to LAN—UDP Port can be set to Port only. The IOLAN will listen
	on the port value configured in the Listen for connections on UDP port
	parameter and will send to the configured port.
	z Both—Messages are relayed in both directions. UDP Port can be set to
	Auto Learn or Port. For messages coming from the LAN to the serial
	device, IOLAN will listen on port value configured in the Listen for
	connections on UDP port parameter for messages coming from the
	learned or configured port. For messages going from the serial device to
	the LAN, the IOLAN will listen on the port value configured in the Listen
	for connections on UDP port parameter and will send to the configured
	or learned (if Auto Learn is enabled, the IOLAN must receive a UDP
	message before it can send one, since the port must first be ’learned’) port.
	Default: Both for UDP 1 and Disabled for all other UDP ranges
Start IP Address	The first host IP address in the range of IP addresses (for IPv4 or IPv6) that the
	IOLAN will listen for messages from and/or send messages to.
	Field Format: IPv4 or IPv6 address
End IP Address	The last host IP address in the range of IP addresses (for IPv4, not supported
	for IPv6) that the IOLAN will listen for messages from and/or send messages
	to.
	Field Format: IPv4 address

133