SPECIAL APPLICATION
400-0384-003 17
Example:
Associate Alarm #1 with subroutine 10 and set
Alarm #1 to trigger at the bottom of every hour
by sending the following commands:
[ALRM1=SUB10]
[SET1ALRM23000]
[ALRMON1]
Alarm #1 is now enabled and running. Every
hour when the minute and second counts match
“30:00”, the functions stored in subroutine 10 will
be executed. If the time is 10:30:00AM, the
alarm will trigger at the following times:
10:30:00
11:30:00
12:30:00 etc.
28. [SET1ALRM3] –MODE 3 -Once ADay
This command is used to set Alarm #1 into
Mode 3.
Command Format: [SET1ALRM3hhmmssCi]
hh = Time in Hours (hh = 00 to 23)
mm= Time in Minutes (mm =00 to 59)
ss = Time in Seconds (ss =00to 59)
Ci = Unit ID (i = # from 1 to 99)
Example:
Associate Alarm #1 with subroutine 10 and set
Alarm #1 to trigger at 12 noon every day by
sending the following commands:
[ALRM1=SUB10]
[SET1ALRM3120000]
[ALRMON1]
Alarm #1 is now enabled and running. Every day
at noon the functions stored in subroutine 10 will
be executed.
29. [SET1ALRM4] –MODE 4 -Once AMonth
This command is used to set Alarm #1 into
Mode 4.
Command Format: [SET1ALRM4hhmmssddCi]
hh = Time in Hours (hh =00 to 23)
mm= Time in Minutes (mm =00 to 59)
ss = Time in Seconds (ss =00to 59)
dd = Date (dd =01 to 31)
Ci = Unit ID (i = # from 1 to 99)
Example:
Associate Alarm #1 with subroutine 10 and set
Alarm #1 to trigger at 2:30PM on the 15th day of
the month by sending the following commands:
[ALRM1=SUB10]
[SET1ALRM414300015]
[ALRMON1]
Alarm #1 is now enabled and running. Every
month on the 15th at 2:30PM the functions
stored in subroutine 10 will be executed.
30. [SET1ALRM5] –MODE 5 -Once AWeek
This command is used to set Alarm #1 into
Mode 5.
Command Format: [SET1ALRM5hhmmsswCi]
hh = Time in Hours (hh =00 to 23)
mm= Time in Minutes (mm =00 to 59)
ss = Time in Seconds (ss =00to 59)
w= Day of the Week (w =1 to 7)
1 =Sunday
2 = Monday
3 = Tuesday
4 = Wednesday
5 = Thursday
6 = Friday
7 =Saturday
Ci = Unit ID (i = # from 1 to 99)