Procedural Instructions
Various DS components may require specific administrative and maintenance procedures to be performed separate from the initial installation procedure. These procedures are outlined in the following pages.
CHANGING A COMPUTER NAME
1.
2.Select the Network Identification Tab.
3.Click the Properties button.
4.Enter the new name, click OK, and then click OK again.
5.Restart the computer when prompted.
CHANGING AN IP ADDRESS
1.
2.
3.Select Internet Protocol (TCP/IP) and click the Properties button.
4.Select Use the Following IP Address.
5.Enter the IP address and subnet mask.
6.If necessary, enter the default gateway and preferred DNS server for your network.
7.Click OK to close all dialog boxes.
CHANGING PASSWORDS
Passwords you should change on your DS system include the DSServiceUser password and the Administrator password.
1.From the Start menu, open Settings and Control Panel.
2.Open Administrative Tools.
3.Open Computer Management.
4.Select Local Users and Groups from the directory tree.
5.Select Users from the directory tree.
6.
7.Enter the new password, confirm it, and click OK.
If you change the DSServiceUser password, you must also change the password for the services that use this account.
1.In Administrative Tools, open Services.
2.
3.Select the Log On tab.
4.Enter the new DSServiceUser password, confirm it, and click OK.
C3662M (6/08) | 33 |