Pelco C3662M Audio In Audio In Audio In Audio In Ground Audio In Audio In Audio In

10.Item ~í is the COM5 connector, which is used to connect RS-422 PTZ cameras. Refer to PTZ Installation on page 29 for installation details.

11.Item ~â shows the connector for the 16 digital inputs and alarm output. Wire your alarm triggers into the input trigger block and connect the signal ground to a GND pin. Wire an alarm device to AO+ and AO–.

12.Connect cameras to the camera inputs=~ä. Inputs 17–32 (the top row of BNC connectors) are available only on 32-input systems.

13.Plug the power cord into an electrical outlet and turn on the power switch ~ã.

14.To turn on the server, use the power switch on the front panel of the unit.

Figure 12. Rear Panel of DS 1000

AUDIO IN 1

AUDIO IN 2

AUDIO IN 3

AUDIO IN 4

GROUND 1

AUDIO IN 5

AUDIO IN 6

AUDIO IN 7

AUDIO IN 8

GROUND 2

AUDIO IN 9

AUDIO IN 10

AUDIO IN 11

AUDIO IN 12

GROUND 3

AUDIO IN 13

AUDIO IN 14

AUDIO IN 15

AUDIO IN 16

GROUND 4

Figure 13. DS 1000 Audio Connector

18 C3662M (6/08)