Pelco C3662M installation manual DS 1000 INSTALLATION, Input

INPUT 1

INPUT 2

INPUT 3

115

INPUT 4

OUTPUT

Figure 10. Rear Panel of 4-Input DS Desktop

AUDIO IN 1

AUDIO IN 2

AUDIO IN 3

AUDIO IN 4

AUDIO OUT 1

AUDIO OUT 2

AUDIO OUT 3

AUDIO OUT 4

GROUND 1

GROUND 2

GROUND 3

GROUND 4

Figure 11. DS Desktop Audio Connector

DS 1000 INSTALLATION

To install DS 1000, refer to Figure 12 on page 18, and then complete the following steps:

1.Plug the power cord into the power connector ì.

2.Plug a monitor into a monitor connector î and its power cord into an electrical outlet. The top connector is for a VGA monitor, and the bottom connector is for a DVI monitor.

3.Plug the USB keyboard into a USB connector ï.

4.Plug the USB mouse into a USB connector ñ.

5.Plug a USB printer into a USB connector ó.

6.Plug PC speakers into the line out connector r.

7.Item s is a SCSI card, which is used to connect to the VSAN external storage units. A chain of up to four VSAN units can be connected to the SCSI card.

8.Item t is the audio connector bracket. From top to bottom are audio inputs 1–4, ground, audio inputs 5–8, ground, audio inputs 9–12, ground, audio inputs 13–16, ground.

9.Connect one or both of the network ports u to a network switch, IP cameras, and so forth using Cat5 cable.

C3662M (6/08) 17