HP 5000n Settings and Defaults, Setting the Display Language, Setting or Default Explanation

Settings and Defaults

The printer makes most printing decisions based on either temporary settings or permanent defaults.

Note	Settings sent from software applications override printer defaults.
Table 3-3. Settings and Defaults
Setting or Default		Explanation
Temporary Setting		A value set for the current print job by the software application.
		For example, a request from the software to print three copies
		instead of the Control Panel default value of one copy is a
		temporary setting. The printer continues to use the temporary
		setting until it receives another software request or until it is reset.
Control Panel Default		A value set at the Control Panel when you select a menu item. An
		asterisk appears, indicating the default setting. The printer retains
		this default when it is turned off.
Factory Default		The value set for each menu item at the factory. Factory defaults
		are listed in the item column in the menu tables starting on page
		3-6.

Setting the Display Language

1Press and hold [Select] while turning on the printer. Hold [Select] until SELECT LANGUAGE appears.

2Release [Select]. INITIALIZING appears briefly. Wait for LANGUAGE=ENGLISH to appear.

3Press [- Value +] repeatedly until the desired language appears.

4Press [Select] to save your choice. An asterisk (*) will appear beside the selected language.

5Press [Go] to exit menu.

3-4Printer Operation EN