HP 5000n manual Memory Full Stored Data Lost, Offline

Table 7-5. Alphabetical Printer Messages (continued)

Control Panel	Event Log Explanation	Recommended
Message	Message	Action

MEMORY FULL STORED DATA LOST

MEMORY SETTINGS CHANGED

MEMORY SHORTAGE JOB CLEARED

MEMORY SHORTAGE PAGE SIMPLIFIED

OFFLINE

There is no available memory in the printer. The current job might not print correctly and some resources (such as downloaded fonts or macros) might have been deleted.

The printer changed its memory settings because it did not have enough memory to use the previous settings for I/O Buffering and Resource Saving. This usually occurs after removing memory from the printer, adding a Duplexer, or adding a printer language.

The printer did not have enough free memory to print the entire job. The remainder of the job will not print and will be cleared from memory.

The printer had to compress the job in order to fit it in available memory. Some data loss might have occurred.

The printer is offline.

The customer might want to add more memory to the printer, or simplify the print job.

You might want to change memory settings for I/O Buffering and Resource Saving (although default settings are usually best) or add more memory to the printer.

1.Press [Go] to continue.

2.Change the Resource Saving setting from the printer’s Control Panel or add more memory to the printer.

Press [Go] to continue. The customer might want to add more memory to the printer.

Press [Go] to place the printer online.

EN Troubleshooting the Printing System 7-21