HP 5000n manual Tray 2 Roller, 42Removing and Replacing Parts

Tray 2 Roller

1Remove the Paper Tray, and tilt the printer backwards, with the front of the printer facing up.

2Depress the tab (A) on the right side cam, and slide the cam and the bushing to the right.

3Rotate the D-Roller 180o and remove it from the shaft.

Figure 6-33Tray 2 Roller (bottom view of printer)

Item

A

B

C

Explanation

Tab is behind this cam.

Cam

Bushings

Hint	To reassemble the roller, orient the pin on the D-Roller so that it lines
	up with the hole on the right side cam. Slide the cam toward the Roller
	until the tab snaps into place.

6-42Removing and Replacing Parts EN