HP 5000n manual Tray 1 Shaft, 52Removing and Replacing Parts

Tray 1 Shaft

1Remove the Top Cover (page 6-12), Left and Right Side Covers (page 6-23), Pickup Gear Assembly (page 6-36), and Paper Handling PCA (page 6-31).

2Raise the green center handle of the Registration Assembly.

3Remove the plastic collar on the right, outside the chassis, by pulling outward on the collar’s release tab and sliding the collar off the shaft.

4Release the collar on the inside right of the chassis by pulling UP on the release tab, and sliding the collar to the left. See Figure 6-42.

Figure 6-42Tray 1 Shaft (right side view of printer)

Item

A

Explanation

Locking Tab

6-52Removing and Replacing Parts EN