Table 3-8. Configuration Menu (continued)

Item

Values

Explanation

PS MEMORY= 400K

0K and up

(This value depends on the amount of installed memory. 8 MB total is required to see this message.)

This item appears only when RESOURCE SAVE=ON. Select the amount of memory used for saving PS resources. Printer default is the minimum amount of memory needed to perform resource saving for PS. Press [-Value+]to change settings by increments of 10 (up to 100 KB) or by increments of 100 (above 100 KB).

PAGE PROTECT=

AUTO

This item appears only after a 21 PAGE

AUTO

ON

TOO COMPLEX, PRESS GO TO CONTINUE

 

 

message displays.

 

 

Memory Enhancement technology (MEt)

 

 

attempts to guarantee that all pages will

 

 

print. If the page does not print, turn PAGE

 

 

PROTECT to ON. This might increase

 

 

chances of a 20 INSUFFICIENT

CLEARABLEJOB

WARNINGS=JOB ON

MEMORY, PRESS GO TO CONTINUE

message. If this occurs, simplify the print job or install additional memory.

Set the amount of time that a clearable warning is displayed on the printer’s Control Panel.

JOB: Warning messages display on the Control Panel until the end of the job from which they were generated.

ON: Warning messages display on the Control Panel until [Go] is pressed.

EN

Control Panel Menus 3-19

Page 64
Image 64
HP 5000n manual PROTECT= Auto, Clearablejob MEMORY, Press GO to Continue