HP 5000n manual Configuration Menu

Configuration Menu

Items in this menu affect the printer’s behavior. Configure the printer according to your printing needs.

Table 3-8. Configuration Menu

Item	Values
POWERSAVE=	OFF
30 MINUTES	15		MINUTES
	30		MINUTES
	1	HOUR
	2	HOURS
	3	HOURS

Explanation

Set the printer to enter PowerSave after it has been idle for a specified amount of time. Turning PowerSave off is not recommended. The PowerSave feature does the following:

1.Minimizes the amount of power consumed by the printer when it is idle.

2.Reduces wear on the printer’s electronic components. (Turns off the display’s backlight.)

When you send a print job, press a Control Panel key, open a paper tray, or open the top cover, the printer automatically comes out of PowerSave mode.

PERSONALITY= AUTO

AUTOPCL PS

Note

PowerSave turns off the backlight on the display, but the display is still readable.

Select the default printer language (personality). Possible values are determined by which valid languages are installed in the printer.

Normally you should not change the printer language (the default is AUTO). If you change it to a specific printer language, the printer will not automatically switch from one language to another unless specific software commands are sent to the printer.

EN Control Panel Menus 3-17