HP 5000n manual Mopier Standard, MODE=STANDARD Enhanced, Ram Disk=Off

Table 3-8. Configuration Menu (continued)

Item	Values	Explanation
MOPIER	STANDARD	Determine how the mopier functions
MODE=STANDARD	ENHANCED	behave. This item appears only when there
	OFF	is at least 8 MB of memory or an optional
		hard disk is installed.
		STANDARD: This option is available if there
		is either a hard disk installed or a RAM disk
		configured in memory. This option uses I/O
		data stored in printer memory for
		generating multiple original prints. (All
		copies will print at the same speed as the
		first copy.)
		ENHANCED: This option is available if there
		is a hard disk installed and at least 8 MB of
		memory. This option uses engine video
		data for printing multiple original prints and
		should print all copies after the first at the
		printer’s maximum speed.
		OFF: Disables the mopier functions. (The
		printer will not spool any jobs to the hard
		disk.)
		When the mopier mode is changed, any
		downloaded resources (such as fonts or
		macros) will need to be downloaded again,
		unless they are stored on an optional hard
		disk or flash DIMM.
RAM DISK=OFF	OFF	Determine how the RAM disk is configured.
	ON	This item appears only if there is no
	AUTO	optional hard disk installed and the printer
		has at least 8 MB of memory.
		OFF: The RAM disk is disabled.
		ON: The RAM disk is enabled. Configure
		the amount of memory to be used through
		the following item: RAM DISK SIZE.
		Note
		If the setting is changed from OFF to ON or
		from OFF to AUTO, the printer will
		automatically reinitialize when it becomes
		idle.

EN Control Panel Menus 3-21