HP 5000n manual I/O Menu Values Explanation, TIMEOUT=15, BUFFER=AUTO Auto, 24Printer Operation

appear.

ON: The I/O BUFFER SIZE item appears (see below). Specify the amount of memory to be used for I/O buffering.

OFF: I/O buffering is not performed and the I/O BUFFER SIZE item does not appear. When the I/O buffer setting is changed, any downloaded resources (such as fonts or macros) will need to be downloaded again, unless they are stored on an optional hard disk or flash DIMM.

I/O BUFFER SIZE

I/O Menu

Items in the I/O (input/output) Menu affect the communication between the printer and the computer.

Table 3-9. I/O Menu

Item	Values	Explanation
I/O TIMEOUT=15	5 to 300	Select the I/O timeout period in seconds. (I/O
		timeout refers to the time, measured in
		seconds, that the printer waits before ending a
		print job.)
		This setting allows you to adjust timeout for best
		performance. If data from other ports appear in
		the middle of your print job, increase the timeout
		value.
		Press [- Value +] once to change settings by
		increments of 1, or hold down [- Value +] to
		scroll by increments of 10.
I/O BUFFER=AUTO	AUTO	Allocate memory for I/O buffering.
	ON	AUTO: The printer automatically reserves
	OFF	memory for I/O buffering. Additional
		configurations are not required and the
		menu item does not

3-24Printer Operation EN