HP 5000n manual EIO Menu Networked Printers, EIO Menu Values Explanation

EIO Menu (Networked Printers)

EIO (Enhanced Input/Output) Menus depend on the particular accessory product installed in an EIO slot of the printer. If the printer contains an HP JetDirect print server EIO card, you can configure basic networking parameters using the EIO Menu. These and other parameters can also be configured through HP JetAdmin.

Table 3-10. EIO Menu

Item Values Explanation

CFG NETWORK=NO	NO
	YES
NOVELL=ON	ON
	OFF
DLC/LLC=ON	ON
	OFF
TCP/IP=ON	ON
	OFF
ETALK=ON	ON
	OFF
CFG NOVELL=NO	NO
	YES

NO: The JetDirect Menu is not accessible.

YES: The JetDirect Menu appears.

Select whether the IPX/SPX protocol stack (in Novell NetWare networks, for example) is enabled (on) or disabled (off).

Select whether the DLC/LLC protocol stack is enabled (on) or disabled (off).

Select whether the TCP/IP protocol stack is enabled (on) or disabled (off).

Select whether the Apple EtherTalk protocol stack is enabled (on) or disabled (off).

NO: The IPX/SPX Menu is not accessible.

YES: The IPX/SPX Menu appears. In the IPX/ SPX Menu, you can specify the frame type parameter used on your network. The default is AUTO, to automatically set and limit the frame type to the one detected.

For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022,

EN_SNAP.

For Token Ring cards, frame type selections include TR_8022, TR_SNAP.

In the IPX/SPX Menu for Token Ring cards, you can also specify NetWare Source Routing parameters, which include SRC RT=AUTO (default), OFF, SINGLE R, or ALL

RT.

EN Control Panel Menus 3-27