51

First Time Setup

—Continued

Equalizer Setting

Here you can adjust the EQ of individual speakers. The
volume of individual speakers can be set on page 50.

Notes:

• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.

1

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.

The main menu appears onscreen.

2

Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker
Setup,” and then press [ENTER].

The Speaker Setup menu appears.

3

Use the Up and Down [ ]/[ ]
buttons to select “4. Equalizer
Settings,” and then press
[ENTER].

The Equalizer Settings menu appears.
This setting is set automatically by the Automatic
Speaker Setup function (see page 39).

1, 8

2–7

2, 3
1
RECEIVER
ENTER
ENTER
Menu
------------------------
1.Initial Setup
2.Speaker Setup
Advanced Setup
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6P f
Basic Setup
2.Speaker Setup
------------------------
2.Speaker Distance
3.Level Calibration
4.Equalizer Settings
1.Speaker Config
ENTER
ENTER

4

Use the Left and Right [ ]/[ ]
buttons to select:

Off:

Tone off, response flat.

Auto:

The tone for each speaker is
set automatically by the Auto-
matic Speaker Setup function.

Manual:

You can adjust the EQ of each
speaker manually.
If you select Manual, continue with this
procedure. If you select Off or Auto, go
to step 8.

5

Use the Down [ ] button to
select a speaker.

6

Use the Up and Down [ ]/[ ]
buttons to select a frequency,
and then use the Left and Right
[ ]/[ ] buttons to adjust the
level at that frequency.

The volume at each frequency can be
adjusted from –12 to +12 dB in 1 dB
steps.
Tip:
Low frequencies (e.g., 80Hz)
affect bass sounds; high frequencies
(e.g., 8kHz) affect treble sounds.

7

Use the Up [ ] button to select
“Left,” and then use the Left and
Right [ ]/[ ] buttons to select
another speaker.

Repeat steps 6 and 7 for each speaker.

8

Press the [SETUP] button.

The setup menu closes.
ENTER
ENTER
Menu
------------------------
1.Initial Setup
2.Speaker Setup
Advanced Setup
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6.Preference
Basic Setup
2.Speaker Setup
------------------------
2.Speaker Distance
3.Level Calibration
4.Equalizer Settings
1.Speaker Config
2-4.Equalizer Settings
------------------------
Left
a. 80Hz : 0dB
b. 250Hz : 0dB
c. 800Hz : 0dB
d.2.5kHz : 0dB
e. 8kHz : 0dB
Use Settings :Manual
ENTER