TX-NR702,602_En.book Page 92 Monday, July 26, 2004 11:05 AM

Troubleshooting—Continued

Tuner

Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t appear?

•Relocate your antenna.

•Move the AV receiver away from your TV or com- puter.

•Listen to the station in mono (page 56).

•When listening to an AM station, operating the remote controller may cause noise.

•Passing cars and airplanes can cause interference.

•Concrete walls weaken radio signals.

•If nothing improves the reception, install an outdoor antenna.

Remote Controller

The remote controller doesn’t work?

•Make sure that the batteries are installed with the cor- rect polarity (page 13).

•Install new batteries. Don’t mix different types of bat- teries, or old and new batteries (page 13).

•Make sure that the remote controller is not too far away from the AV receiver, and that there’s no obstruction between the remote controller and the AV receiver’s remote control sensor (page 13).

•Make sure that the AV receiver is not subjected to direct sunshine or inverter-type fluorescent lights. Relocate if necessary.

•If the AV receiver is installed in a rack or cabinet with colored-glass doors, the remote controller may not work reliably when the doors are closed.

•Make sure you’ve selected the correct remote control- ler mode (page 13).

•When using the remote controller to control other manufacturers’ AV components, some buttons may not work as expected.

•Make sure you’ve entered the correct remote control code.

Can’t control other components?

•If it’s an Onkyo component, make sure that the cable and analog audio cable are connected properly.

Connecting only an cable won’t work (page 37).

•Make sure you’ve selected the correct remote control- ler mode (page 14).

•If you connect an MD recorder or CD recorder to the TAPE jacks, be sure to set make the necessary setting (pages 52 and 80).

•When learning commands, make sure that the trans- mitting ends of both remote controllers are pointing at each other.

•Are you trying to learn from a remote controller that cannot be used for learning? Some commands cannot be learnt, especially those that transmit several instructions with a single button press.

•The wrong remote control code has been entered.

•The entered remote control code may not be correct. If more than one code is listed, try each one.

•With some AV components, certain buttons may not work as expected, and some may not work at all.

•To control Onkyo components, point the remote con- troller at the AV receiver.

•To control another manufacturer’s component, point the remote controller at that component.

Recording

Can’t record?

•On your recorder, make sure the correct input is selected (e.g., digital or analog).

Zone 2

Zone 2 has turned off?

•Was the Sleep function set? The Sleep function turns off Zone 2 as well as the AV receiver. To set the Sleep function for Zone 2 only, see page 78.

There’s no sound?

•Since the Zone 2 function and the REC OUT outputs use the same circuitry, you cannot use Zone 2 and record at the same time. When the [REC OUT] button is pressed, Zone 2 is turned off.

•Only components connected to analog inputs can be played in Zone 2.

92

Page 91 Page 93
Page 92
Image 92
Onkyo TX-SR8260 Remote controller doesn’t work?, Can’t control other components?, Can’t record?, Zone 2 has turned off?
Page 91 Page 93

TX-SR8260, TX-SR602/602E, TX-SR702/702E specifications

The Onkyo TX-SR702/702E, TX-SR602/602E, and TX-SR8260 are part of Onkyo's esteemed lineup of home theater receivers, each designed to deliver an exceptional audio experience. These models are well-regarded for their robust construction, innovative features, and advanced technologies that cater to both audiophiles and casual listeners.

Starting with the TX-SR702/702E, this 7.1-channel receiver offers 100 watts per channel, providing ample power to drive a wide range of speakers. One of its standout features is its support for Dolby Digital EX and DTS-ES, which create a more immersive sound environment. Additionally, the TX-SR702/702E comes with Onkyo’s custom application for optimizing audio depending on room acoustics, ensuring the best performance regardless of space.

The TX-SR602/602E, while slightly lower in power handling at 75 watts per channel, still includes high-quality surround sound capabilities, supporting Dolby TrueHD and DTS-HD Master Audio. This model is perfect for those who desire a compact yet powerful setup. With its user-friendly interface and straightforward setup process, the TX-SR602/602E is an excellent choice for newcomers to home theater systems.

For those seeking a more feature-rich option, the TX-SR8260 provides a powerful 100 watts per channel with an extensive array of connectivity options. It features multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players and gaming consoles seamlessly. The TX-SR8260 also supports 4K pass-through technology, ensuring compatibility with the latest video formats.

All three receivers incorporate Onkyo’s integration of Audyssey MultEQ technology for precise room acoustic measurement and correction, enhancing audio fidelity. This technology allows the receiver to automatically adjust its settings according to the room's dimensions and speaker positioning for a tailored sound experience.

In terms of design, each of these models boasts a robust chassis with an emphasis on high-quality components, ensuring durability and longevity. Notably, they are compatible with various streaming services, offering onboard Wi-Fi and Bluetooth connectivity for easy access to a wide array of media.

In summary, the Onkyo TX-SR702/702E, TX-SR602/602E, and TX-SR8260 receivers are superb choices for anyone looking to build an impressive home theater system. With their powerful performance, advanced technologies, and excellent build quality, they cater to a diverse range of audio enthusiasts. Whether for movie nights or music listening, these receivers promise to significantly enhance the home entertainment experience.
Top Page Image Contents