9
Front & Rear Panels
—Continued
For detailed information, see the pages in parentheses.
A
POWER switch (38)
American and Australian models don’t have this
switch.
This is the main power switch. When set to OFF, the
AV receiver is completely shutdown. When set to
ON, it’s in Standby mode and the STANDBY indi-
cator lights up.
Don’t turn on the power until you’ve completed,
and double checked all connections.
B
STANDBY/ON button (38)
This button is used to set the AV receiver to On or
Standby. For models with a POWER switch, this
button has no effect unless the POWER switch is set
to ON.
C
STANDBY indicator (38)
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
D
ZONE 2 indicator (78)
This indicator lights up when Zone 2 is selected.
E
Remote-control sensor (13)
This sensor receives control signals from the remote
controller.
F
REC OUT button (66)
This button is used to select the input source to be
recorded.
G
ZONE 2 button (78)
This button is used to select the input source for
Zone 2.
H
LEVEL button (78)
This button is used to set the volume for Zone 2.
I
Controller [ ] [ ] buttons (66, 78)
These buttons are used to select the input source to
be recorded via the REC OUTs, the input source for
Zone 2, and to set the volume for Zone 2.
J
STEREO button (60)
This button is used to select the Stereo listening
mode.
K
LISTENING MODE [ ] [ ] buttons (60)
These buttons are used to select the listening modes.
L
DISPLAY button (55)
This button is used to display various information
about the currently selected input source.
M
Display
See “Display” on page 10.
N
MEMORY button (57)
This button is used when storing or deleting radio
presets.
O
TUNING MODE button (56)
This button is used to select the Auto or Manual tun-
ing mode.
P
DIMMER or RT/PTY/TP button (54, 59)
This button is used to adjust the display brightness.
On the European model, this is the RT/PTY/TP but-
ton, and it’s with RDS (Radio Data System). See
“Using RDS (European models only)” on page 58.
Q
SETUP button
This button is used to access the onscreen setup
menus that appear on the connected TV.
R
Arrow/TUNING/PRESET & ENTER buttons
When the AM or FM input source is selected, the
TUNING [ ] [ ] buttons are used to tune the
tuner, and the PRESET [ ] [ ] buttons are used
to select radio presets (see page 57). When the
onscreen setup menus are used, they work as arrow
buttons and are used to select and set items. The
ENTER button is also used with the onscreen setup
menus.
S
RETURN button
This button is used to return to the previously dis-
played onscreen setup menu.
T
MASTER VOLUME control (53)
This control is used to adjust the volume of the AV
receiver to MIN, 1 through 99, or MAX
U
PURE AUDIO button & indicator (60)
The American TX-SR602 doesn’t have this button
and indicator.
This button is used to select the Pure Audio listen-
ing mode. The indicator lights up when that mode
selected.
V
PHONES jack (54)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
W
SETUP MIC (39)
The included speaker setup microphone is con-
nected here for automatic speaker setup.
X
TONE, [–] & [+] buttons (70)
These buttons are used to adjust the bass and treble.
Y
Input selector buttons (53)
These buttons are used to select from the following
input sources: MULTI CH, DVD, VIDEO 1,
VIDEO 2, VIDEO 3, VIDEO 4, TAPE, TUNER,
CD, or PHONO (TX-SR702/702E only).
The [MULTI CH] button selects the DVD analog
multichannel input.
Z
VIDEO 4 INPUT (33, 67)
This input can be used to connect a camcorder,
games console, and so on. There are jacks for opti-
cal digital audio, S-Video, composite video, and
analog audio.