Onkyo TX-SR8260, TX-SR602/602E Displaying Radio Text RT, Listening to Traffic News TP

TX-NR702,602_En.book Page 59 Monday, July 26, 2004 11:05 AM

Basic Operation—Continued

Displaying Radio Text (RT)

1

When tuned to an RDS station that’s broadcasting RT text information, that information can be displayed.

1	Press the [RT/PTY/TP] button
	once.

The RT information scrolls across the display.

Notes:

•The message “Waiting” may appear while the AV receiver waits for RT information.

•If the message “No Text Data” appears on the display, no RT information is available.

4	To start the search, press
	[ENTER].
	The AV receiver searches until it finds a
	station of the type you specified, at
	which point it stops briefly before con-
	tinuing with the search.
5	When a station you want to listen
	to is found, press [ENTER].
	If no stations are found, the message
	“Not Found” appears.

Listening to Traffic News (TP)

1 2 3

You can search for TP radio stations.

Finding Stations by Type (PTY)

1 2 4, 5 3

You can search for radio stations by type.

1	Use the [TUNER] input selector
	button to select FM.
2	Press the [RT/PTY/TP] button
	twice.
	The current program type appears on
	the display.
3	Use the PRESET [ ]/[ ] buttons
	to select the type of program you

want.

See the table on page 58.

1

2

3

Use the [TUNER] input selector button to select FM.

Press the [RT/PTY/TP] button three times.

If the current radio station is broadcast- ing TP (Traffic Program), “[TP]” will appear on the display, and traffic news will be heard as and when it’s broad- cast. If “TP” without square brackets appears, this means that the station is not broadcasting TP.

To locate a station that is broad- casting TP, press [ENTER].

The AV receiver searches until it finds a station that’s broadcasting TP.

If no stations are found, the message “Not Found” appears.

59