JVC HR-J271MS SET Brand Code, Operate Unit, Multi-brand Remote Control, TV PR +/-,NUMBER keys

28EN

V CABLE/SAT/DVD

VCR

1	2	3
			2	NUMBER
4	5	6
7	8	9
	0		4

Multi-brand Remote Control

For satellite receiver, cable box and DVD

Your remote control can operate the basic functions of your satellite receiver , cable box or DVD.

Before you start . . .

●Turn on the satellite receiver, cable box or DVD using its remote control.

SET BRAND CODE

Refer to the chart below. While holding down CABLE/

SAT/DVD on the recorder's remote control, enter one

1 of the brand code corresponding to the make of your

unit using the NUMBER keys, then press OK.

Check if the unit's power goes off as it should. If it does,

try other operations (☞ step 2).

● Once you have set the remote control to operate the

unit, you don't have to repeat this step until you

LAY1

REW

STOP

3

TV PR+/–

FF

OK

@#+/–

		replace your remote control's batteries.
	● Some brands have more than one code. If the unit
		does not function with one code, try entering another.
2	OPERATE UNIT
	First, press CABLE/SAT/DVD to set the remote control to
	unit mode, then press the corresponding button:
	For satellite receiver and cable box . . .
			, TV PR +/–,NUMBER keys.
	For DVD. . .
			, PLAY, STOP, PAUSE, FF, REW,
	@#(4¢) keys.
	● For some brands of unit, you must press OK after
		having pressed the NUMBER keys.

ATTENTION

The remote control can operate not only the video recorder but also some of your TV, cable box, satellite receiver and DVD.

●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.

●To operate your TV, first press the TV button to set the remote control to the TV mode.

●To operate your satellite receiver, cable box or DVD, first press the CABLE/SAT/DVD to set the remote control to the satellite receiver, cable box or DVD mode.

IMPORTANT

Although the provided remote control unit is compatible with JVC satelite receiver and DVD, as well as many other models, it may not work with your unit, or in some instances, may have limited function capability.

NOTES:

●It's not possible to set the two units at the same time. You can only set the remote control to operate one of these units at a time.

●You have to subscribe to a satellite or cable service to receive satellite or cable channels.