30EN
EDITING
Edit To Or
From Another
Video
Recorder
1 2 3
2
4 5 6
7 8 9
4
You can use your video recorder as the source player or the recording deck.
MAKE CONNECTIONS
1 Connect the player's AUDIO/VIDEO OUT connector to the recorder's AUDIO/VIDEO IN connector.
●Use the L connector for monaural connection.
| SET RECORDING DECK'S |
2 | INPUT MODE |
Set to AUX. With this video recorder, press NUMBER | |
key "0" and/or PR +/ – to | |
| |
SELECT "EDIT" FOR PICTURE | |
| CONTROL SET MODE |
| Follow the "Picture Control" section on page 15, then |
3 select "EDIT." | |
4 | START SOURCE PLAYER |
Engage its Play mode. | |
5 | START RECORDING DECK |
Engage its Record mode. |
NUMBER "0"
1
IMPORTANT:
0
PR +/–
NOTES:
● All necessary cables can be obtained from your dealer. |
● When you use this recorder as the player for editing, be sure |
to set "O.S.D." to "OFF" before starting (☞ pg. 8). |
● NTSC tapes being played back in the NTSC [PAL mode |
(☞ pg. 33) cannot be dubbed to another recorder. |
● When you dub an NTSC tape using your recorder as the |
playback deck, select NTSC 3.58 (or NTSC 4.43) with the |
COLOUR SYSTEM button (☞ pg. 32). |
●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.
●For more information on multi-system compatibility, ☞ pg. 32.
● When you select "EDIT" to dub tapes, be sure to select |
"AUTO" (or "NORM" when the B.E.S.T. function is set to |
"OFF") after you finish dubbing the tapes (☞ pg. 15). |
TV Receiver | Player | Your recorder | Recorder | Your recorder | TV Receiver |
VIDEO |
| AV Cable |
| AV Cable | VIDEO |
| (not provided) |
| (not provided) | ||
CHANNEL |
|
| CHANNEL | ||
|
|
|
| ||
RF Cable (provided) |
|
| RF Cable |
| |
|
|
|
| (provided) | |
|
| Another recorder | Another recorder |
| |
Recorder |
|
| Player |
|