1

SP/LP/EP

2

DAILY

3

2

EN21

SET TAPE SPEED

6 Press SP/LP/EP () to set the tape speed.

RETURN TO NORMAL

SCREEN

7 After confirming all information is correct, press PROG or OK. "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears.

Repeat steps 1 7 for each additional programme.

ENGAGE RECORDER'S

TIMER MODE

8 Press ä. The recorder turns off automatically and "ä" appears on the display panel.

To disengage the timer, press ä again.

4

7

5 6

8 9

WEEKLY

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 7, press WEEKLY (NUMBER

1

PROG

4

0

SP/LP/EP

3

OK

key "9") for weekly serials or DAILY (NUMBER key "8") for daily serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

At the programme check screen

When the weekly serials are programmed, a day of the week appears. When the daily serials are programmed, "DAILY" appears.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen. To record the extra programme, you must first cancel any unnecessary programmes (pg. 22).

Page 21
Image 21
JVC HR-J277MS, HR-J271MS, LPT0421-001B specifications Engage Recorders Timer Mode, Press SP/LP/EP to set the tape speed