JVC HR-J271MS Edit From a Camcorder, SET Recorders Input Mode, Start Camcorder, Start Recorder

Edit From A Camcorder

1 2 3

2

4 5 6

7 8 9

EN31

You can use a camcorder as the source player and your video recorder as the recorder.

MAKE CONNECTIONS

1 Connect the camcorder's AUDIO/VIDEO OUT connec- tors to the recorder's rear panel AUDIO/VIDEO input connectors.

●Use the L connector for monaural connection.

SET RECORDER'S INPUT

MODE

2 Press NUMBER key "0" and/or PR +/ – so that "L-1" appears on the display panel.

SELECT "EDIT" FOR PICTURE CONTROL SET MODE

3 Follow the "Picture Control" section on page 15, then select "EDIT."

START CAMCORDER

4 Engage its Play mode.

NUMBER "0"

4

0

PR +/–

START RECORDER

5 Engage its Record mode.

	1
Recorder	Your recorder

AUDIO IN

VIDEO IN

AV Cable (not provided)

VIDEO OUT

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

●When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when B.E.S.T. is set to "OFF") after you finish dubbing the tapes( ☞ pg. 15).

IMPORTANT:

●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.

●PAL, SECAM and NTSC camcorders can be used as a player for editing.

●For more information on multi-system compatibility, ☞ pg. 32.

Camcorder

AUDIO OUT

Player