JVC LPT0421-001B, HR-J277MS, HR-J271MS specifications Recording Features

Recording Features

PR +/–

RECORD

– –:– –

1 2 3

2

4 5 6

7 8 9

EN17

Record One Programme

While Watching Another

SELECT CHANNEL TO

WATCH

1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV's channel controls appears on the TV screen while the one selected with the PR +/ – buttons is recorded on the tape.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

1	SET COUNTER DISPLAY
	Press – –:– – until a counter reading appears on the
	dispay panel.
	● By pressing the – –:– – button, you can change the
	display to show the counter reading, channel
	position*, clock time.
	*Channel position is not displayed during playback.

RESET COUNTER

2 Press 0000 before starting recording or playback.

0000

4

0

PR +/–

● The counter is reset to "0:00:00" and shows the exact

elapsed time as the tape runs.

Instant Timer Recording (ITR)

1

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "" blinks and 0:30 appears on the front display panel.

SET RECORDING DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.