Zone 2 and Zone 3—Continued

Selecting an Input Source for Zones

• On the North American model, you can select a differ-

ent radio source for each room. For example, XM for

1

Remote

controller

ZONE3

ZONE2

On the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button.

On the AV receiver, press the [ZONE 2] or [ZONE 3] button.

your main room, SIRIUS for Zone 2, and AM/FM for

Zone 3.

Turning Off Zones

1

On the remote controller, press

AV receiver The ZONE 2 or ZONE 3 indicator

ZONE 2flashes, and the input selector currently selected for the zone appears on the dis- play.

ZONE 3

Remote

controller

ZONE3

ZONE2

the [ZONE 2] or [ZONE 3] REMOTE MODE button.

On the AV receiver, press the [ZONE 2] or [ZONE 3] button.

2

Remote

controller

DVD VCR/DVR CBL/SAT

1 2 3

GAME/TV AUX1 AUX2

4 5 6

TAPE TUNER CD

On the remote controller, use the INPUT SELECTOR buttons.

On the AV receiver, use the input selector buttons, or press the

AV receiver

The ZONE 2 or ZONE 3 indicator

ZONE 2

flashes.

ZONE 3

7 8 9

PHONO

+10

AV receiver

ZONE 2

[ZONE 2] or [ZONE 3] button repeatedly

The input source is selected, the zone is turned on, the name of the input selec- tor appears on the display, and the ZONE 2 or ZONE 3 indicator lights continuously.

2

Remote

controller

STANDBY

AV receiver

OFF

On the remote controller, press the [STANDBY] button.

On the AV receiver, press the [OFF] button.

The zone is turned off, and the ZONE 2 or ZONE 3 indicator goes off.

ZONE 3

Notes:

To select AM or FM, press the [TUNER] input selec- tor button repeatedly. On the North American model, you can also select XM or SIRIUS.

Only analog input sources are output by Zone 2 and Zone 3. Digital input sources are not output. If no sound is heard when an input source is selected, check to make sure it’s connected to an analog input.

While Powered Zone 2 is being used, listening modes that require surround back speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES, and THX Ultra2 Cinema, are unavailable.

When Zone 2 is turned on, the output from the ZONE 2 12V TRIGGER OUT goes high (+12 volts).

While Zone 2 or Zone 3 is on, the Auto Power On/

Standby and Direct Change functions do not work.

You cannot select different AM or FM radio stations for your main room, Zone 2, and Zone 3. The same AM/FM radio station will be heard in each room.

Note:

When Zone 2 is turned off, the output from the ZONE 2 12V TRIGGER OUT goes low (0 volts).

105

Page 105
Image 105
Onkyo SR805 instruction manual 105, Selecting an Input Source for Zones, Turning Off Zones, On the remote controller, press