Onkyo SR805 instruction manual Equalizer Settings

Advanced Setup—Continued

Equalizer Settings

These settings are set automatically by the Automatic Speaker Setup function (see page 55).

With the Equalizer settings, you can adjust the tone of speakers individually with a 7-band equalizer. The vol- ume of each speaker can be set on page 90.

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
RECEIVER	[SETUP] button.
	The main menu appears onscreen.
S
E
T
UP

4	Use the Left and Right [	]/[ ]
	buttons to set the “Equalizer”
	option to:
ENTER	Off: Equalizer off, flat response.
	Manual: The equalizer for each
	speaker can be set manually.
	Audyssey:The equalizer for each
	speaker is set automatically
	by the Automatic Speaker
	Setup function.
	If you selected Manual, continue with
	the next step. If you selected Off or
	Audyssey, go to step 8.
5	Use the Down [ ] button to
	select “Channel,” and then use
	the Left and Right [ ]/[	] but-
ENTER	tons to select the speaker.

You can select: Front, Center, Sur-

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press [ENTER].

The Speaker Setup menu appears.

2.Speaker Setup

1.Speaker Settings 2.Speaker Config 3.Speaker Distance 4.Level Calibration 5.Equalizer Settings 6.THX Audio Setup

round, Surr Back, or Subwoofer.

ENTER

6	Use the Up and Down [ ]/[ ]
	buttons to select a frequency,
	and use the Left and Right
	ENTER
	[ ]/[ ] buttons to cut or boost

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “5. Equalizer Settings,” and then press [ENTER].

The Equalizer Settings screen appears.

2-5.Equalizer Settings

Equalizer	Manual
Channel	Front
63Hz	0dB
160Hz	0dB
400Hz	0dB
1000Hz	0dB
2500Hz	0dB
6300Hz	0dB
16000Hz	0dB

that frequency.

You can select: 63 Hz, 160 Hz, 400 Hz,

1000 Hz, 2500 Hz, 6300 Hz, or

16000 Hz. And for the subwoofer,

25 Hz, 40 Hz, 63 Hz, 100 Hz, or

ENTER

160 Hz.

Each band can be cut or boosted from

–6 dB to +6 dB in 1 dB steps.

Tip: Low frequencies, such as 160 Hz,

affect bass sounds; high frequencies,

such as 6300 Hz, affect treble sounds.

91