Onkyo SR805 instruction manual 109, Controlling Other Components, Resetting the Remote Controller

Controlling Other Components—Continued

Remote Control Codes for Onkyo Components Connected via

Onkyo components that are connected via are con- trolled by pointing the remote controller at the AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example.

1	Make sure the Onkyo component is con-
	nected with an	cable and an analog
	audio cable (RCA).
	See page 43 for details.
2	Enter the appropriate remote control code
	to the REMOTE MODE button.

Resetting the REMOTE MODE Buttons

You can reset a REMOTE MODE button to its default remote control code.

1		While holding down the REMOTE
REMOTE MODE		MODE button that you want to
		reset, press the TV [	] button.
DVD VCR
CD	TV	The Remote indicator flashes three

CDR/MD	times.
CABLE
SAT

• [DVD] REMOTE MODE button 5002: Onkyo DVD player with

• [CD] REMOTE MODE button 6002: Onkyo CD player with

• [MD] REMOTE MODE button 6008: Onkyo MD recorder with

• [CDR] REMOTE MODE button 6006: Onkyo CD recorder with

See the previous page for how to enter remote control codes.

3 Press the REMOTE MODE button, point the remote controller at the AV receiver, and operate the component.

2

REMOTE MODE

DVD VCR

CD TV CDR/MD

CABLE

SAT

Press the REMOTE MODE button again.

The Remote indicator flashes twice, indicating that the button has been reset.

The [DVD] and [CD] REMOTE MODE buttons are preprogrammed with remote control codes for control- ling Onkyo DVD players and CD play- ers, respectively. When these buttons are reset, the preprogrammed codes are restored.

If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control

an Onkyo component that’s not connected via , use the following remote control codes:

• [DVD] REMOTE MODE button

5001: Onkyo DVD player without (default)

• [CD] REMOTE MODE button

6001: Onkyo CD player without (default)

• [MD] REMOTE MODE button 6007: Onkyo MD recorder without

• [CDR] REMOTE MODE button 6005: Onkyo CD recorder without

Note:

•If you connect an -capable Onkyo MiniDisc or CD recorder to the TAPE IN/OUT jacks, for remote oper- ation to work properly, you must set the Input Display to MD or CDR, respectively (see page 51).

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1		While holding down the
	RECEIVER	[RECEIVER] REMOTE MODE but-
		ton, press the [STANDBY] button.
		The Remote indicator flashes five
		times.
	STANDBY

2		Press the [RECEIVER] REMOTE
		MODE button again.
	RECEIVER	The Remote indicator flashes twice,
		indicating that the remote controller
		has been reset.

109