Onkyo SR805 instruction manual Advanced Setup, Crossover frequency

Advanced Setup—Continued

5

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Front,” and then use the Left and Right

[]/[ ] buttons to select a crossover frequency.

Note:

•Fixed at Full Band if Subwoofer (step 4) is set to No.

8

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Surr Back,” and then use the Left and Right []/[ ] buttons to select a crossover frequency.

If no surround back speakers are con- nected, select None.

Notes:

• Cannot be set if Speaker Type is set

to Bi-Amp or BTL (page 45), Sur-

round is set to None (step 7), or Pow-

ered Zone 2 is being used

(page 103).

• Cannot select Full Band if Surround

6

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Center,” and then use the Left and Right

[ ]/[ ] buttons to select a

(step 7) is set to anything other than

Full Band.

ENTER

crossover frequency.

If no center speaker is connected, select None.

Notes:

•Cannot set if Speaker Type is set to BTL (page 45).

•Cannot select Full Band if Front (step 5) is set to anything other than Full Band.

9

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Surr Back Ch,” and then use the Left and Right []/[ ] buttons to select:

1ch: Select if one surround back

speaker is connected.

2ch: Select if two (left and right) surround back speakers are connected.

Note:

7

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Surround,” and then use the Left and Right

[]/[ ] buttons to select a crossover frequency.

If no surround left and right speakers are connected, select None.

Notes:

•Cannot set if Speaker Type is set to BTL (page 45).

•Cannot select Full Band if Front (step 5) is set to anything other than Full Band.

•Cannot be set if Speaker Type is set to Bi-Amp or BTL (page 45), Surr- Back is set to None (step 8), or Pow- ered Zone 2 is being used

(page 103).

Continue with step 10 on the next page.

87