Onkyo SR805 instruction manual Selecting Audio Inputs Specifying the Digital Signal Format

Common Functions—Continued

Selecting Audio Inputs Specifying the Digital Signal Format

REC	PLAYLIST		RANDOM
	LISTENING MODE
STEREO	SURR
REPEAT	AUDIO	SUBTITLE	PLAY MODE
PURE A	DIRECT	THX	ALL ST
TEST TONE	CH SEL	LEVEL-	LEVEL+
OPEN/CLOSE	VIDEO OFF
AUDIO SEL	AUDIO SEL	L NIGHT	Re-EQ
	VCR	DVD	HDD

RC-690M

If you connect a component to more than one audio input, such as a DVD player connected to analog, digital, multichannel, and HDMI inputs, you can use the [AUDIO SEL] button to select which audio input you want to use to listen to that component.

Press the [AUDIO SEL] button

AUDIO SEL repeatedly to select an audio

input: HDMI > Auto > Multich > Analog.

HDMI: Selects the assigned HDMI IN, and the HDMI indicator appears on the display. (The HDMI IN must already be assigned to the current input selector. See page 48.)

Auto: Selects the assigned COAX- IAL or OPTICAL DIGITAL IN, and the DIGITAL indica- tor appears on the display.

(The DIGITAL IN must already be assigned to the current input selector. See page 52.) If there is no digital signal, the analog input is used instead.

Multich:Selects the multichannel input, and the ANALOG indi- cator appears on the display. (The multichannel input must already be assigned to the current input selector. See page 54.)

Analog: Selects the analog input, and the ANALOG indicator appears on the display.

1

2

MASTER VOLUME

STANDBY/ON

STANDBY

READY

ZONE 2

ZONE 3

PURE AUDIO

AUDIO SEL

DVD

VCR/DVR

CBL/SAT

GAME/TV

AUX 1

AUX 2

TAPE

TUNER

CD

PHONO

DISPLAY

PUSH TO OPEN

ZONE 2

OFF

LEVEL

TONE

HDMI OUT

STEREO

THX

TUNING

RETURN

SETUP MIC

AUX 2 INPUT

TUNING

PHONES

POWER

RT/PTY/TP MEMORY

MODE

SETUP

PRESET

CLEAR

ZONE 3

DIGITAL INPUT

LISTENING MODE

ENTER

S VIDEO

VIDEO

L AUDIO

R

DIGITAL

TUNING

Normally, the AV receiver detects the format of digital input signals automatically. However, if you experience either of the following issues when playing PCM or DTS sources, you can specify the signal format manually.

•If the beginnings of tracks from a PCM source are cut off, try the PCM setting.

•If noise is produced when fast forwarding or rewind- ing a DTS CD, try the DTS setting.

1Press the [AUDIO SEL] button repeatedly to select Auto.

AUDIO SEL

2	While “Auto” is shown on the dis-
	play, use the Left and Right
	[ ]/[ ] buttons to select:

PCM: Only input signals in PCM format are output, and the PCM indicator lights up. The indicator flashes if the input signal is not PCM.

DTS: Only input signals in DTS format are output, and the DTS indicator lights up. The indicator flashes if the input signal is not DTS.

Auto (default): The format is detected automatically. If no digital input signal is present, the analog input is used instead.

70