Onkyo SR805 106, Adjusting the Volume of Zones Muting Zones, Adjusting the Tone of Zone

Zone 2 and Zone 3—Continued

Adjusting the Volume of Zones

Muting Zones

Remote

controller

ZONE3

ZONE2

LEVEL LEVEL

AV receiver

On the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then use the [LEVEL–] and [LEVEL+] buttons.

On the AV receiver, press the [ZONE 2] or [ZONE 3] button, press the [LEVEL] button, and then use the Up [ ] and Down [] buttons.

ZONE3

ZONE2

MUTING

On the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then press the [MUTING] button.

To unmute a zone, on the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then press the [MUTING] but- ton again.

Adjusting the Tone of Zone 2

1	On the AV receiver, press the
	[ZONE 2] or [ZONE 3] button.
	AV receiver
	ZONE 2

Adjusting the Balance of Zones

1	On the AV receiver, press the
	[ZONE 2] or [ZONE 3] button.
	AV receiver
	ZONE 2

	ZONE 3
2	TONE	Press the AV receiver’s [TONE]
		button repeatedly to select Bal-
		ance.
3		Use the Up [ ] and Down [ ]
		buttons to adjust the balance.

You can adjust the balance from 0 in the center to +10 dB to the right or +10 dB to the left in 2 dB steps.

	ZONE 3
2	TONE	Press the AV receiver’s [TONE]
		button repeatedly to select Bass
		or Treble.
3		Use the Up [ ] and Down [ ]

buttons to adjust the bass or tre- ble.

You can boost or cut the Bass or Treble from –10 dB to +10 dB in 1 dB steps.

Notes:

•Zones can also be unmuted by adjusting the volume.

•The tone cannot be adjusted for Zone 3.

•The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the Zone 2 Out setting is set to Fixed (page 104).

•The Zone 3 level and balance functions have no effect on the ZONE 3 PRE OUT when the Zone 3 Out set- ting is set to Fixed (page 104).

106