Zephyr AK8200AS and Installing Filters, Maintenance - Cleaning, Surface Maintenance, Hood Model

and Installing Filters

www.zephyronline.com

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly using a micro fiber or clean cotton cloth and with the grain.

Baffle Filters

The filters are intended to trap residue and grease from cooking. Although the fi lters should never need replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry fi lters and re-install before using hood.

Maintenance – Cleaning

Installing Baffle FIlters, FIG 4:

1.Place fi lter into top groove of the power pack as shown and pull towards front of power pack using handles.

2.Pivot back of fi lter upwards so it is angled in the power pack.

3.Push fi lter into channel on back of power pack to lock into place.

Replacing Baffle Filters:

Hood Model:	Part No.	Qty. to Order
AK8200AS	50210010	2
AK8300ASX	50210010	3

1

3

2

FIG 4

16