HP 5000n manual 38DC Controller Assembly long screws, 48Removing and Replacing Parts

Figure 6-38DC Controller Assembly (long screws)

Item

A

Explanation

Long Screws

5Remove the two screws (A) (Figure 6-38) located at the back of the DC Controller Assembly, inside the chassis. These are long screws; their position requires the use of a magnetized screwdriver.

6Facing the rear of the printer, remove the two spring-loaded machine screws closest to the ground wire removed in step 4 above. Remove the spring-loaded machine screw closest to you on the right side.

7Slide the DC Controller Assembly out of the rear of the chassis.

6-48Removing and Replacing Parts EN