Checking Memory Installation

Follow this procedure to verify that DIMMs are installed correctly:

1 Check that the printer’s control panel displays READY when the printer is turned on. If an error message appears, a DIMM might have been incorrectly installed. Check the printer messages.

2 Print a new configuration page.

3 Check the memory section on the configuration page and compare it to the configuration page printed before the DIMM installation. If the amount of memory has not increased, the DIMM might not be installed correctly (repeat the installation procedure), or the DIMM might be defective (try a new DIMM).

4 See Chapter 7, Troubleshooting, for additional information.

Installing EIO Cards / Mass Storage

Turn off the printer before installing the EIO card or mass storage device. Slots will accommodate either type of device.

For more information, see Appendix C in the User’s Guide.

EN

User Installable Accessories 6-5

Page 144
Image 144
HP 5000n manual Checking Memory Installation, Installing EIO Cards / Mass Storage