HP 5000n manual Press GO to Continue, Cycle Power to Continue

Table 7-6. Numerical Printer Messages (continued)

Control Panel	Event	Explanation	Recommended
Message	Log		Action
	Message

55 PRINTER ERROR

alternates with

PRESS GO TO

CONTINUE

56.x PRINTER ERROR

alternates with

CYCLE POWER TO CONTINUE

An internal communication error occurred.

A temporary printing error occurred.

XDescription

1 Illegal input.

2 Illegal output.

1.Press [Go]. The page containing the error will automatically be reprinted.

2.Check power at the site.

3.Replace the Formatter PCA.

4.Replace the DC Controller.

1.Press [Go]. The page containing the error will automatically be reprinted.

2.Turn the printer off, and then turn the printer on.

3.Check the printer’s configuration.

57.x PRINTER ERROR

59.x PRINTER ERROR

An error occurred with the Fan’s motor.

XDescription

1 Printer Fan

A motor error occurred.

XDescription

0 Motor error.

1 Motor start-up error.

2 Motor rotation error.

1.Check the Fan’s connector and make sure the Fan is not blocked.

2.Replace the Fan.

1.Turn the printer off, and then turn the printer on.

2.Make sure the Fuser or Toner Cartridge is not hindering movement of gears in the drive train.

3.Check the Main Motor’s cable to ensure that it is seated properly.

4.If the error persists, replace the Motor.

EN Troubleshooting the Printing System 7-35