HP 5000n manual Loading, Do not Power OFF, 20Troubleshooting

Table 7-5. Alphabetical Printer Messages (continued)

Control Panel Message

Event Log Explanation	Recommended
Message	Action

INSTALL TRAY x

LOADING

PROGRAM <number>

alternates with

DO NOT POWER OFF

MANUALLY FEED [TYPE] [SIZE]

The printer is unable to print the current job because the specified tray (x) is open or not inserted correctly.

Programs and fonts can be stored on the printer’s file system. At bootup time these entities are loaded into RAM. (These entities can take a long time to load into RAM depending on the size and number of entities being loaded.) The <number>specifies a sequence number indicating the current program being loaded.

One of the following occurred:

A manual feed was requested.

There is no paper in Tray 1.

The wrong size of paper is loaded.

The Control Panel is not set for the kind of paper loaded.

1.Re-insert the specified tray.

2.Check for damaged tabs in the tray.

3.Check for damaged switches in the printer.

4.Replace the PCA Controller in the feeder.

Wait for the program to load.

1.Load the requested paper into Tray 1.

2.Press [Go] if the desired paper is already loaded in Tray 1.

3.Press [-Value+]to scroll through the available types and sizes.

4.Press [Select] to accept the alternate type or size.

7-20Troubleshooting EN