Frequently asked questions
What if one or more residual heat indicators flash?
Possible fault | Fix |
|
|
There was a power failure during use. | Turn the cooktop on as usual. |
The burners are turned off. |
|
|
|
The residual heat indicators were lit | The residual heat indicators will flash |
while the programming mode, e.g. | for about 45 minutes after leaving the |
Safety Lock, was selected. | programming mode. |
| The cooktop can be used as usual. |
|
|
What if when the cooktop is turned off, the timer display shows numbers and the burner displays show A, F or numbers?
The touch controls could not be reset automatically. They must be reset manually.
See, "Resetting the touch controls - Manual reset".
If the problem persists, call Miele Technical Service.
What if the rear burner display shows F, the front burner display shows E and the timer shows numbers?
Possible fault | Fix |
|
|
Trip the circuit breaker to the cooktop | If the problem persists, call Miele |
or disconnect the appliance from the | Technical Service. |
main power supply for 1 minute. |
|
|
|
29
