| Installation | |
Protective bottom plate | Sealing | |
The cooktop bottom must be installed |
| |
in such a way that the bottom is | The cooktop must not be permanently | |
shielded and cannot be touched. | sealed into the countertop when | |
A wooden base and front cover must | installed. The sealing strip under the | |
edge of the cooktop provides a | ||
be installed if: | ||
sufficient seal for the countertop. | ||
|
–no oven is installed underneath.
– the cooktop is larger than the oven or | If the cooktop is sealed into position, | |
the countertop or appliance could | ||
control unit underneath. | ||
be damaged if the cooktop needs to | ||
| ||
– the cooktop and the oven | be removed for maintenance or | |
underneath are built in staggered. | service. |
The minimum distance from the top edge of the countertop to the wooden base must be 2 3/16" (55 mm).
Between the base and the back panel there must be an air gap of 3/8"
(10 mm).
39