MPI Card Slot
The MPI card is equipped with an RF jack for antenna/cable signal source connection. The slot is also available for installing a PPV card.
Note: (LG3DDH TVs only) Turn the TV On. If the Express Script Installer Menu Wizard is present on the display (e.g., this is the first time the TV has been turned On), exit the Express Script before inserting the PPV card.
MPI Card Removal / PPV Card Installation
1.Remove the two MPI card retainer screws.
2.Pull out the current MPI card far enough so that the RF cable can be detached from the old card.
3.Detach the RF cable.
4.Place the new PPV card into the slot and slide it in far enough to reconnect the RF cable.
5.Reconnect the RF cable.
6.Insert the card all the way into the slot making sure it is fully seated into the back plane connector.
7.Replace the two card retainer screws.
ANTENNA
/CABLE
RF CABLE
RF cable needs to be disconnected to remove current card.
MPI
10 |