Installer Overview
This is the Commercial Mode Setup Guide only.
Installer Menu / Commercial Mode Setup
To set up a Master TV, you will need to know how to enter the TV Installer Menu and make changes to the default values as required. If necessary, familiarize yourself with the Installer Menu and how to make and save changes. Refer to page 18 for information on accessing the Installer Menu. Pages 18 to 23 describe Installer Menu items in detail.
Installer Remote
An LG Installer Remote similar to that shown to the right is required to set up and operate the TV. See next page for typical key functions.
Cloning
Cloning refers to the process of capturing a Master TV Setup and trans- ferring it to a Target TV. The Master TV’s clonable features need to be configured as part of the Commercial Mode Setup. This is a critical step. If the Master TV’s clonable
+
AAA
+ AAA
Installing Batteries in Installer
Remote
•Remove the battery compartment cover on the back side of the remote by pressing the arrow tab forward and lifting.
•Install two
•Replace the battery compartment cover.
HOSPITAL PTC INSTALLER MENU
000 INSTALLER SEQ | 000 |
|
|
UPN | FPGA E0F1 |
PTC V1.00.000 | CPU V3.06.00 |
|
|
Typical Installer Menu
MUTE POWER
CH
BANK PREVIEW GUIDE
SAP INFO CC
| CH |
VOL | OK |
VOL | |
| CH |
FLASHBK
TIMER MENU ALARM
ADJ
ADJ ADJ ADJ
BED1 BED2
12 |