LG Electronics 32LG3DCH, 32LG3DDH, 22LG3DDH Installer Remote Control Typical Key Functions

Installer Remote Control Typical Key Functions

To put the Installer Remote into TV operating mode, select TV with the MODE button.

The LG Installer Remote illustrated below and throughout this document shows typical remote control functions and is provided for reference only. This Installer Remote may vary from your Installer Remote.

MUTE

Switches sound On or Off.

SAP * Analog Mode: Selects MTS sound (Mono, Stereo, or SAP). DTV Mode: Changes the audio language, if additional languages are available.

INFO Displays channel information. INFO feature is not functional for Aux sources.

CC Selects a closed caption option, unless the Channel Banks Setup Menu is currently on the screen, in which case this option displays the Lock (V-Chip) Menu.

NUMBER Buttons (0 - 9) DASH Use to enter a program number or channel. Dash is used for sub-channel numbers such as 9-1,9-2, etc.

FLASHBK Returns to the previously tuned channel.

Up/Down/Left/Right Arrows Tune to added channels in menu. Also, use to navigate on-screen menus and adjust TV settings.

*SAP notes:

•SAP settings are retained with power Off/On for individual analog channels.

•If SAP is selected and no SAP is provided, sound may not be heard on channel.

•Each analog channel may have its own SAP setting.

•Digital channels will reset to default audio language with a power Off/On.

MUTE POWER

CH

BANK PREVIEW GUIDE

SAP INFO CC

	CH
VOL	OK
	VOL
	CH

FLASHBK

TIMER MENU ALARM

ADJ

ADJ ADJ ADJ

BED1 BED2

POWER

Turns the TV On or Off.

BANK

Selects Channel Bank 1, 2, 3, or 4.

CH PREVIEW

Displays and exits the Channel Banks Setup Menu.

GUIDE

Displays and removes the electronic program guide.

CHANNEL UP/DOWN

Selects available channels found with Auto Tuning.

VOLUME UP/DOWN Increases/decreases sound level.

OK (Enter)

Tunes in deleted channels in scan. Also, use to adjust TV settings.

TIMER

Sets the amount of time before the TV automatically turns itself Off.

MENU

Provides access to the TV setup menus on the screen. Also, enters or exits the on-screen menu system.

ALARM

Enables users to schedule a one-time “alarm” event, in which the TV turns itself On at the user-specified time.

Bed Switch

Set to Bed 1 or Bed 2 as applicable (per Installer Menu item 027 HOSPITAL MODE setting).

206-4096 13