Dometic 7020 dimensions Carry-On 7000 Portable Air Conditioners Installation, Batten

Carry-On 7000 Portable Air Conditioners • Installation

Figure 1. The Carry-On positioned in the boat hatch with the Hatch Bag in place. See inset Figure 2.

Alternate
Batten Pocket	Batten
	Batten Pocket

Figure 2. Close-up of Batten and Batten Pockets

1.Place in open hatch as shown. (See Figure 5.) Adjust Carry-On so that the hatch pad protects and insulates the hatch and the Carry-On unit. Make sure that movement of Carry-On is stifled due to wedging action of the hatch pad as it presses against hatch edge.

NOTE: Carry-On may be further secured using the D-ring type "tie downs".

2.Place hatch bag over Carry-On in grooves provided. Do not allow hatch bag to cover air intake vents or condensate drain. (See Fig. 1.)

3.Adjust the hatch bag over the hatch

cover and hatch opening. The hatch bag is designed to keep outside air from entering the hatch while the Carry-On is in use. The fit should be as snug as possible. Use the battens provided to form the deckframe. Slide the battens into the pockets provided. Note that there is an alternative set of batten pockets for use with a smaller hatch. Should you decide to

Figures 3a & 3b. These figures show proper and improper positioning and leveling of the Carry-On unit in the boat hatch. It is very important that the Carry-On be level.

L-2245

3a. Proper Positioning In Hatch

	3b. Improper Positioning In Hatch
6	❖ English