Channel Banks Setup
Select a channel bank using the INPUT or BANK button on your Installer Remote. After the desired bank is selected, press CH PREVIEW to display the Channel Banks Setup Menu.
Channel Status Options for Channel Banks
In the Channel Banks Setup Menu, use the Channel Up/Down arrows to go to a channel and the Left/ Right arrows to select the channel status. See also sample channel status charts on the following page.
CHANNEL PREVIEW - BANK 1
CH |
| ||
|
|
|
|
Enter
CC
Channel Banks Setup Menu
IDs currently selected channel bank.
IDs currently selected channel.
IDs channel status in selected bank.
Channel Status Options
•
•
•
•
Adding / Deleting / Blanking Channels
It is best to do ADD / DEL customizing before doing “BLANK.” Auto Tuning (channel search) enters the same channel numbers in Channel Banks 1, 2, 3, and 4. Auto Tuning also removes any channels previously custom- ized with ADD / DEL / BLANK. All channels found in the channel search will be included, and any channels previously found but not currently available will not be included. ADD and DEL (not BLANK) can be used inde- pendently for Channel Banks 1, 2, 3, and 4. (If a channel was not found in the channel search [and was not added during the Commercial Mode Setup/Express Script procedures], it can be added using the Manual Tuning option in the Channel Menu.)
Note: A channel blanked, is blanked in all channel banks.
Selecting Deleted Channels
To tune to a
•Select a channel bank where the channel is added.
•Direct enter the channel number. Then, go to the bank where the channel is set as
Note: Installer Menu item 028 CH. OVERIDE must be set to 001 to allow access to the channel scan. Channel allocations in tuning bands:
•Broadcast and Broadcast Digital: 2 - 69
•CABLE - CATV, HRC or ICC: 1 - 125
Inactive TV Setup
To create an inactive TV display on Channel Bank 4, select
27 |