Whirlpool ACQ062MP0 manual Position the Air Conditioner, Complete Installation

Models: ACQ062MP0

1 24
Download 24 pages 55.39 Kb
Page 6
Image 6
Position the Air Conditioner

Position the Air Conditioner

Handle air conditioner with care.

Be sure your air conditioner does not fall out of the opening during installation or removal

The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded outlet.

Do not block the louvers in the front panel.

Do not block the louvers on the outside of the air conditioner.

1.Center air conditioner in window. Check that lower rail of air conditioner is behind and against back side of window seal. Lower window sash to hold cabinet in place.

1

2

Attach side curtains to window

1. Pull left curtain out until it fits into the window channel. Repeat with right curtain.

2. Insert one of the slotted round-head screws through left curtain and into the window channel or through alternate hole at the top of the curtain and into the window channel to fasten the curtain to the window sash.

3. Repeat for the right curtain.

Front view

1 2

1.#8 x ³⁄₄ in. round-head screw

2.Side curtain

1.Window sash

2.Lower rail behind back side of window seal

2.Check that air conditioner cabinet is tilted to the outside so that water will run to the outside. Place level on the top, right side of air conditioner cabinet. There should be a tilt to the outside of at least ¹⁄₂ bubble (1.4º).

3.Place level on left side of air conditioner and check that cabinet is tilted properly. If cabinet is not properly positioned, reposition or shim cabinet to provide the proper tilt.

Attach side curtains to window 1

Top view

2

1

1.Side curtain against window channel

3

2.Window channel

3.#8 x ³⁄₄ in. round-head screw

1. Level showing at least ¹⁄₂ bubble

Complete Installation

1.Place window-lock bracket on top of lower window and against upper window sash to prevent air conditioner from falling out of window.

2.Use a ³⁄₃₂ in. drill bit to drill a starter hole though the hole in the bracket.

3.Attach window-lock bracket to window sash with #8 x ³⁄₄ in. round-head screw.

1

2

1.Upper window sash

2.Window-lock bracket

6

Page 6
Image 6
Whirlpool ACQ062MP0 manual Position the Air Conditioner, Complete Installation, Attach side curtains to window