ADIC SNC 5100, Scalar 1000 manual Managing the SNC, Commands Listed Alphabetically byFunction

SNC 5100

Service Port Command

Reference

A “shell” interface provides access to the management and configuration commands referenced in this chapter.

The shell is accessible by connecting a terminal or computer with terminal emulation software to the SNC 5100’s Service Port. For more information, see “Connecting to the Service Port” on page 95.

Managing the SNC 5100

The ADIC Management Console application is the preferred method for managing the SNC 5100. When you use the ADIC Management Console, the operations described in this reference are carried out through the client application.

For more information, see the ADIC Management Console User Guide.

The following table is a list of the commands grouped by function.

Commands

This section specifies the commands that are available to control, manage, and service the SNC 5100.

The commands are listed alphabetically by function in Table 13.

The commands are listed in alphabetical order beginning on page 114.

Table 13: Commands Listed Alphabetically byFunction

Command or Command	Description	Page
Group
Command and Control
disableCC	Disable Command and Control Interface	117
enableCC	Enable Command and Control Interface	118

Managing the SNC 5100 105

6-00020-02