ADIC Scalar 1000, SNC 5100 manual FcPortModeSet port,mode, FcRestart port

SNC 5100

fcPortModeSet [port],[mode]

The fcPortModeSet command sets the mode for the specified Fibre Channel port. See also the fcPortModeGet command.

The default port mode is Public Target. Consequently, if attached to a Fabric device the SNC 5100 will register as a Target with the name server. If the port mode is Private Target, the SNC 5100 does not register with the name server and the Fabric device will not recognize the SNC 5100 as a Target.

The port must be in Initiator mode if you want the SNC 5100 to scan for target devices on the port. When the port is in Private Initiator mode, the SNC 5100 only scans for devices on the local loop. If the port mode is in Public Initiator mode, the SNC 5100 also scans for devices attached to a Fabric.

Parameter	Value	Meaning
Port	1	The SNC 5100 connection labeled FC1
	2	The SNC 5100 connection labeled FC2
Mode	1	Private Target
	2	Private Initiator
	3	Private Target and Initiator
	17	Public Target
	18	Public Initiator
	19	Public Target and Initiator

SN60023 > fcPortModeSet 1,2 value = 0 = 0x0

SN60023 >

Caution

You must issue the fcRestart command or reboot the SNC 5100 for the new setting to take effect. See the fcRestart command for further information.

fcRestart [port]

The fcRestart command restarts the specified Fibre Channel port. You

126 Commands

6-00020-02