ADIC SNC 5100, Scalar 1000 manual Setting the Time and Date, Setting the Real Time Clock

	SNC 5100
	Table 12: Zmodem Status Codes
Status	Description
Code
-12	CRC Error - degraded link
-13	Timeout Error
-14	File size error - file size is different than it was supposed to be
-15	Invalid file type
-16	Too many retries - degraded link
-17	Position Error - file data has been lost

Setting the Time and Date

Setting the Real Time Clock

Step 1. Use the rtcDateSet command to manually set the Real Time Clock.

For more information, see the

"rtcDateSet[year],[month],[dayofmonth],[dayofweek], [hour],[minute],[second]" command on page 154.

Example:

SN60023 > rtcDateSet 2001,1,26,5,9,30,00 value = 0 = 0x0

SN60023 >

Step 2. Use the dateSetFromRTC command to set the SNC 5100’s RTC as the source of date display.

For more information, see the "dateSetFromRTC" command on page 116:

Example:

SN60023 > dateSetFromRTC value = 0 = 0x0 SN60023 >

Step 3. Use the tzSet command to set the timezone. EST is used in the example for Eastern Standard Time.

Setting the Time and Date 101

6-00020-02