ADIC SNC 5100, Scalar 1000 manual String, RtcSetCurrent

SNC 5100

string:

SN60023 > rtcDateSet 2001,1,26,5,9,30,00 value = 0 = 0x0

SN60023 >

Caution:

The time will be one hour off when Daylight Savings Time is in effect.

rtcSetCurrent

The rtcSetCurrent command is used after the rdate “timeserver” command in order to synchronize the local Real Time Clock with the timeserver running on a remote host. Use the date command to see the synchronized settings.

SN60023 > rtcSetCurrent value = 0 = 0x0 SN60023 >

rz

The rz command initiates a receive Zmodem file transfer session. You use this command when you want to download a file from the service terminal to the SNC 5100. The file can be either a firmware or configuration file. After issuing this command, you start the file transfer from the service terminal by initiating a send file operation that uses Zmodem protocol.

The example below shows the rz command when it is used to receive a file that contains operational firmware. The SNC 5100 extracts individual firmware modules from the file and saves them temporarily in memory. After the file transfer has completed, the SNC 5100 copies the firmware modules to nonvolatile flash memory. The SNC 5100 must be rebooted to use the updated firmware.

SN60023 > rz **B000000023be50

Firmware Update in Progress....

Found Image File BOOTROM.IMG – loading

.........Found Image File IPOST.IMG – loading

.........Found Image File SPOST.IMG – loading

Firmware Update Complete. Reboot for Update to Take Effect. value = 0 = 0x0

Commands 155

6-00020-02