ADIC SNC 5100, Scalar 1000 manual Snc

SNC 5100

If the host cannot access all of the target devices, then there is a problem with the devices or their SAN connections. Proceed to“Device Access MAP” on page 48 or “Fibre Channel MAP” on page 61.

Step 5. Shut down all of the hosts.

Step 6. Enter the sfmActiveSet command from the service terminal.

For more information, see the "sfmActiveSet" command on page 165.

Step 7. Use the ADIC Management Console to verify the host and target device access settings.

For more information, see the ADIC Management Console User Guide.

Private SAN®Scalar Firewall Manager Settings MAP 79

6-00020-02