ADIC Scalar 1000, SNC 5100 manual DateSetFromRTC, DiagBoot, DiagHelp

SNC 5100

The local Real Time Clock can also be synchronized with a remote timeserver See the rtcSetCurrent command.

SN60023 > date

SN60023 > THU JAN 25 20:32:49 2001

SN60023 >

dateSetFromRTC

The dateSetFromRTC command sets the SNC 5100’s RTC as the source of the date display. Use the date command to display the date and time.

SN60023 > dateSetFromRTC value = 0 = 0x0 SN60023 >

diagBoot

This command is used only to transition the SNC 5100 from normal operation to the special diagnostic mode. The diagBoot command first ensures that the ffs:mt directory exists. It verifies that the files diagnstk.o and diagnstk.rc are in the flash file system. If they are in the root directory, it moves them to the ffs:mt directory.

It copies the existing bootline to a file in the ffs:mt directory on the SNC 5100 and installs a new bootline directing the SNC 5100 to boot using a special diagnostic startup script ffs:mt/diagnstk.rc. It renames the persistent map file config/device.map as config/device.bak (a new file will be generated after rebooting).

Finally, diagBoot issues a reboot command to put the changes into effect

Caution

After completing use of the diagnostic commands, use the normalBoot command to restore your system to normal operation.

diagHelp

The diagHelp command displays a list of the diagnostic commands.

SN60023 > diagHelp

** Diagnostic commands: Available in Diagnostic Mode Only **

elTest Test Ethernet port w/loop-back cable fcSlotTest <portnum> Test specified Fibre Channel port

116 Commands

6-00020-02